What's New From Woody's
In the traction industry, we have to stay sharp, offer excellent quality and really keep pushing ourselves on our process capabilities and innovations so we can compete and remain the world leader. Continually working on new products and our manufacturing processes improves the quality and performance of Woody's® traction products.
Woody's® first introduction into the ATV/UTV accessory market An ATV/UTV bucket hauler system. Available in two receiver sizes 1 1/4" & 2". 
|
![Woodys[r] Stud Hex Tool
You always need to have the right tool for the job.
A great new tool for installing studs because they need to be really tight and you are working in close quarters. The aluminum handle will rest in the palm of your hand so you can apply the pressure needed to keep the stud from rotating as you torque the nut. Woodys[r] new Stud Hex Tool will make installing studs easier each step of the way. Each tool comes with two hex bits.
You can also buy a replacement package of two hex bits for your Stud Hex Tool.](/photos/th_hex-tool2_web.jpg)
![Performance Dooly is 31% Lighter and More Aggressive
Woodys[r] new Slim Jim [tm]Dooly [tm]
The original Dooly was designed to reduce the front skis jerking as they hunted for the track of the snowmobiles that had gone before. This reduction in front end darting allowed you to regain confidence in your riding abilities because you could trust your front control traction.
Assertive riders need to be able to read traction as they maneuver through changing trail configurations and ground conditions. The new Slim Jim Dooly embodies the anti-dart and adds superb cornering control. The Slim Jims enhanced cornering capabilities allow you take it to the edge of traction and feel comfortable enough to bring it there and back when and if you want to. That level of riding can only be achieved by those who are able to trust their traction.
The Slim JIm[tm] Dooly[tm] is available in 4, 6 and 8 inches of 60[d] turning carbide for Arctic Cat, Polaris, Ski-doo and Yamaha snowmobiles through the Woody's[r] runner line.](/photos/th_Slim-Jim_a_web.jpg)
![Woody's Grand Master[tm] Stud and Support Plates for Ski-Doo Rev XP and Camoplast Single Ply Tracks.
Woody's Grand Master is equivalent to BRPs Phantom Stud.
This larger head stud and resulting larger support plates are now being sold by Woody's under the name Grand Master[tm]. This TESTED and OEM APPROVED stud is designed with a larger 1.200 head to provide a larger anchor to distribute pressure over a wider area on the single ply track.
The Grand Master[tm] will come as a kit complete with studs, nuts and larger round or *square aluminum support plates in two stud lengths, 1.075 with standard nuts and 1.325 with ALN2-4500 Big Nuts. They are packaged in quantities of 24, 84, 96 and 500. This stud is also available in a 12 piece package for use with Double Grand[tm] Digger[r] support plates.
TORQUE SPEC--Grand Master studs must be torqued to 20 ft. lbs.
Template studding patterns for single ply tracks will be available for 2.52, 2.86 and 3.00 pitch tracks.
Contact your dealer to determine if you have a single ply track.
*2.52 pitch tracks must use the square aluminum large Digger[r] support plates in the GMPS-1075 or the GMPS-1325.
In the part numbers listed below, the GMPR indicates packages with round support plates, the GMPS indicates packages containing square support plates.](/photos/th_Grand-Master_web.jpg)
![The first introduction in Woody's[r] ATV and UTV accessory line, is available now. Ask your ATV or UTV dealer for Woody's Pail Pal[tm].
Two 5-gallon pails (not included) will transport animal feed, water, farm or gardening supplies and tools. Finished working, use it for hauling your hunting and fishing or camping gear leaving your rack space open. The usefulness of your ATV or UTV has increased significantly. No more holding on to buckets or the contents sloshing down your back.
Woodys Pail Pal is better than any other ATV/UTV accessory bucket hauler is it attaches at the hitch, not on the racks leaving you with:
More open space on the ATV racks.
The ATV or UTVs center of gravity is lowered.
Reduces the distance you have to lift filled buckets by 50%.
When you just want to ride your ATV/UTV, remove the safety pin and take the Pail Pal off the hitch receiver.
The Pail Pal is made of heavy gauge steel for strength and powder coated for a durable finish. It is available for two receiver sizes: Clevis and safety pin are included. Buckets not included. Some assembly required.](/photos/th_pail-pal_only_bolts_web.JPG)
![The Double Grand[tm] Digger[r] support plate can only be used with the Grand Master stud in stud patterns on our 286S, 300S and 252S templates for single ply tracks. This addition of a dual configuration gives you more studding options in the middle belt.
The Double Grand] Digger is available in 12 piece packages. The Grand Master stud is available in a 12 piece package for on the Double Grand[tm] Digger[r] patterns for single ply tracks available under Trail Templates.
TORQUE SPEC-The Grand Master stud must be torqued to 20 ft. lbs.](/photos/th_Double-Grand-Digger_web.jpg)
